Bo's Tables

Bo's Tables are made with a combination of Dado, Rabbet, Dowel, screws and Mortise and Tenon Joints. They are finished with high quality polyurethane and/or natural Tung Oil (non-curing, water-resistant). Tables finished in natural oil should receive occasional upkeep with lemon or mineral oils.

Redwood Burl End Table

The Rustic Redwood Burl end table is approx. 3ft by 2ft, length and width, by 28 inches tall. The legs are made of wild New Mexico maple "shrub" trunks, with split aspen braces. It is finished in polyurethane.
$1,150.
Shipping may vary, usually costs $200.00

approximate total: $1,350

The nifty CubeTable

This unique pine table is called the Cube because it is an approximate 20 inch cube dimensionally. The table is made of highly finished pine. It is constructed with numerous grooves, dado and rabbet joints amongst other methods and wedged braces. It features diamond-beveled legs.

Below: The table is turned upside down to get some close-ups of the joinery. One of the sturdiest tables ever!

A really neat table!

$500. including shipping!
add $45 for an aromatic red cedar top (not pictured)
Specify if you would any other woods. We'll gladly work it out for not much more than cost of materials.

Split Aspen Spice Racks

The Split Aspen Spice Rack is full of spicy aspen reds and oranges to spice up your kitchen. It usually fixes to the wall by 6 predrilled holes. It is finished in tung oil and polyurethane for easy cleaning. If you have other dimenions you would like, please specify.
34"x17"x4"
$385.00 (I'll contact you with shipping info when I get it).